|
|
|
|
Lock-n-Haul®
Testimonials
**Click here to purchase** |
|
"Excellent product Jim. I use it on a 250 ProXS and
it handles the gnarly roads, RR tracks, etc. Takes maybe 5 mins to set up - and
I like the strength and small size. BTW my old school last 'motor toter' bounced
off the trailer connection (stayed on motor) and jacked the motor when the
bracket end hit the road and blew out the main ram top bracket and seals. Do the
math."
Todd Matherne - Houston, Texas
"Great
product, worked great, I can get rid of my 4.5' transom saver bar. Probably
gonna order another one for back up"
Levi Kinchlow - Suffolk, Virginia
"Absolutely love the Lock-n-Haul. Holds motor very
steady during travel, no shaking, no movement. Extremely light weight and
conveniently small to
easily store."
Pat Tran - Omaha, Nebraska
"After spending way too much time trying
to find a support for my Mercury 115 Optimax and trying to make something
myself, I came across the Lock-n-Haul. This is
one of those products that is simple yet works perfectly. It took about 2
minutes to adjust for my application and has worked flawlessly
ever since."
Mike
Shea - Long Beach, California
"Jim, nice product..
Have been using with my Ranger 520 and Yamaha 225 HPDI for a couple of months. I
used the larger white one sold by one of your competitors for about a year but
didn't like how it would not clear the mounting location on a Yamaha. Your
product solves this issue."
Doug
Denton - Clayton, North Carolina
"Thank you for the
upgrades to my Lock-n-Haul and the clear concise instructions on how to install
them. This unit works like a charm and does just what it was designed to do. I
am very happy with your product and the upgrades that were sent free of charge.
Good luck to you, Jim and those who provided input to make this product even a
greater investment."
Merritt Obreiter - Toledo, Ohio
"Jim, being an
owner of Ranger Z-Series Boats with their built in Jack Plates and then along
with the extra 8” plate I have mounted I love your Lock-n-Haul. The typical
transom saver just does not work well with the length required to get down to
the trailer & then where do you store it when removed. Your system is not only
easy to mount providing protection, but when I remove it I can store it
anywhere. Love the size & the way it works on my Etec
250 HO!!! Thanks
for making a great & user friendly product."
Rob Jasper - Pantego, Texas
"Purchased Lock-n-Haul for my 01 225 Evinrude.
Product works great, used to use the factory brace, but motor kept tilting.
Lock-n-Haul keeps it from tilting side to side and is very sturdy. I would
absolutely recommend this device."
Michael Grabo - Burnt Hills,
New York
"Worked
as advertised and money well spent. I would absolutely recommend this device."
Scott Montgomery - Odon,
Indiana
"Jim, I am quite impressed with the Lock-n-Haul. I
have used it for almost 2 months and my motor has never been so secure. The
motor doesn't shake, rattle or turn. It is an outstanding product."
Robert Duval -
Shrewsbury, Massachusetts
“I switched from a standard transom saver to a lock-n-haul and I’m VERY
impressed with this device. It really locks the motor down and stops all
sideways movement. I would 100% recommend this product! Both friends and my
mechanic were impressed and are also looking to purchase one for their boats.“
John Henry - Ontario, Canada
“I am completely
satisfied with my unit and wanted to know if you had any decals, etc. to put on
my boat windshield and/or my GMC Yukon ? My boat is a 21 TRX Triton with a 250
mercury.”
Rich Godwin -
Shreveport, Louisiana
"I think the
Lock-n-Haul is an excellent design. With its small size but very strong
structure its easy to handle and does not take up hardly any
space. I broke two
transom savers before switching the the Lock n Haul and have not had one issue
with and its nice that my lower unit is no longer
taking all of the road
shock from the trailer."
Brent Sauble - Willow Park, Texas
"I
purchased the Lock-n-Haul about four weeks ago. Since then I have towed the boat
over 1500 miles and the lock-n-haul works great. I don't have to worry about the
motor or steering components and it's so much easier to use than the old motor
toter products available. Great product and I will continue to recommend it to
others."
Ryan Phillips - Columbia, South Carolina
"The Lock-n-Haul is a well thought out and functional device. I was a little
sceptical about how it "locks" the engine to boat but after watching the
engine through the rear view mirror while towing, I
understood. When hitting bumps or holes in the road and boat bounces, the engine
doesn't move at all
in relation to the
boat as with the standard transom saver. It's "locked" in place and doesn't
vibrate, wobble, or wiggle. And, that's a good thing."
Darrell Lehmann - Richardson, Texas
"The
Lock-n-Haul works perfectly on all outboards. It is a very simple, functional
device that completely stabilizes the motor."
Gary Dobyns - Yuba City, California
"The best thing I can say about the Lock-N-Haul – the boat and
motor become ONE! There is absolutely no movement of my motor when stowed with
the Lock-N-Haul. That is, of course, unless the boat is moving!"
Mike
Kernan - Dallas, Texas
"Finally
a great product to secure my Yamaha. Does the job in seconds....just as
advertised."
Spiro Stamos - Cupertino, California
"I am not
sure what product you are using, but you need to check out the custom transom
saver product from "Lock-n-Haul"! I picked up one of these and love it! It is
very simple to put on and remove and it will not damage your motor or boat. I
will never go back to a traditional transom saver again. This unit also absorbs
all of the shock and vibration from normal travel instead of having your lower
unit risk potential damage from traditional transom savers! Check out.http//:www.locknhaul.com"
Scott Gordon - Grapevine, Texas
"I absolutely LOVE using the Lock-N-Haul. It makes
my HPDI sit still on these bumpy roads here in Western North Carolina. No more
pulling over to straighten the motor up, like with the old style transom saver."
Mike Stewart - Asheville, North Carolina
"This was by far one of the best purchases I have made for my boat. My
engine would move from side to side even with the transom saver that came with
my
boat. It was also a hassle having to worry about
storing the old transom saver inside my Yukon. The Lock-n-Haul is compact
enough I can store it in one of the compartments in the boat. The roads
are not the most forgiving in some parts of Texas but with this product you can
rest assured your engine
will stay in place
and absorb anything the road brings you. Purchase this in confidence."
Robbie Milam -
Lewisville, Texas
"I saw your booth at the Arlington Convention
Center back in January. I told you then that I didn't have a boat, but that I
might be buying a friend
one. That's what this is for. The Lock-n-Haul beats the heck out of all of the
other transom savers on the market as far as ease of use and sturdiness."
Lyndon Johnson - Fort Worth, Texas
"I have been using the Lock-N-Haul device for over
2 years now and love it! It is so convenient, light weight and easy to stow that
I couldn't imagine going back to the old style transom saver. I also like the
fact that going down the road I'm not watching my engine bouncing all over the
place wearing
out my bushings and loosening my transom bolts. I'm
a sold customer!"
Andy Caldwell -
Plantersville, Texas
"Not only is the lock-n-haul effective and does what it claims to do, but the
convenience of putting it on and taking it off is worth the price alone. I am
glad I am not pulling and tugging on my old transom saver to release it from my
lower unit anymore as I would get road grime and grease all over my hands. I
like how it stores right in my boat."
Rob Romaguera - Mansfield, Texas
"Only had the Lock-n-Haul for
short while but seems to be working fine. The price was great compared to the
other brands."
Dan Lee -Yuba City, California
"The
Lock-n-Haul device is the best piece of equipment I've used to lock my motor
down for traveling. It's light and small enough to fit in the back compartment
of my boat while fishing. In the past, I've had to use 3 & 4 foot long motor
toters which are long & bulky and I had to always store these in my vehicle
because they could fit in any of my boat's compartments. The motor toters also
scar your lower unit and removes the paint. I'm a guide on Lake Fork and
everyone who has seen my Lock-n-Haul device has been impressed."
Marcel Bryson -
Lake Fork, Texas
|
|
**Click here to purchase** |
|
|
