Slidekicks ice scratchers

The all new Patent Pending Slidekicks are a new concept in ice scratcher design that is both reverse-gear compatible and features replaceable wear points. Slidekicks are a cable type scratcher that bolt to the slide rail easily. The flexible cable design allows the sled to be run in reverse without damaging the scratcher. Like other scratchers, they provide the coolling and lubrication necessary when running in hard snow conditions. When scratchers are not needed, simply hook them over the rail. Each kit contains (2) scratchers, (2) standard tips, mounting hardware and installation instructions.

	Price:	65.99 ,KIT (see below for options and pricing)
	slidekicks
	O/P1 Selection - Slidekicks - 66.00 Standard replacement tips - 9.00 Carbide replacement tips - 34.00

Universal slide rail mount Ice scratchers

Ice scratchers prevent hi-fax wear and overheating when riding on ice or hard-packed snow. These spring loaded scratchers drag in the snow creating a spray of ice chips into the skid frame lubricating your hi-fax. These scratchers will lower water temerature up to 30 degrees F on hard pack snow. Sold in kit form, easy to install and allows removal of extra wheels thus eliminating up to 4 pounds. Hooks over rails when not in use. Not to be used in reverse or when loading on trailers (damage can occur).

	Price:	58.95 ,PR (see below for options and pricing)
	scratchers

Anti-Stab kit for rear suspensions

These wheel kits replace the stock limiter strap mount and keep the track from coming in contact with the tips of the suspension rails. Rail modification may be necessary. These kits are highly recommended for use with NO-Slip Drive Sprickets. Kits include: Four 2 3/4" OD rubber compound wheels, shaft, spacers, and bolts.

	Price:	93.00 ,KIT (see below for options and pricing)
	antistabkit
	C/S/O1 ApplicationsArctic Cat & Yamaha (center limiter strap)Polaris & Ski-Doo (center limiter strap)Arctic Cat & Yamaha (dual limiter strap)Polaris & Ski-Doo (dual limiter strap)

SLP Slide rail extension kits for Polaris

These rail extension kits includes all the necessary parts to professionally extend slide rails. Sold per set. Tunnel extensions are required in most applications.

	Price:	78.00 ,PKG (see below for options and pricing)
	slprailextpolaris
	O/P1 Application - Polaris Edge 2000-2005 Models 121" to 136" (Includes Spacers) Axle length 7.5" Longer - 88.00 Polaris Models with OEM 136" Rails - 136" to 144" All Years (Includes Spacers) 4" axle extension - 88.00 Polaris Models with 144" Rails (Includes Spacers) - 144" to 151" -4" axle extension - 88.00 Polaris Models with 151" Rails (Includes Spacers) 151" to 159" -4" axle extension - 88.00 Polaris Models with 159" Rails (Includes Spacers) 159" to 166" -4" axle extension - 88.00 Polaris 1997 Dom. Twins and All 1998 + w/ 8 tooth drivers Axle length 7.5" Longer -121" to 136 - 88.00 Polaris Models with 144" Rails (Includes Spacers) -144" to 156" -6" axle extension - 88.00 Polaris Models with 151" Rails (Includes Spacers) 151" to 156" -2.5" axle extension - 88.00 Polaris Models with 144" Rails (Includes Cross shaft) 144" to 159" -7.5" axle extension - 88.00 Polaris Models through 1997 (except Domestic Twins) 121" to 133" -6" axle extension - 78.00 Polaris Models through 1997 (except Domestic Twins) 121" to 136" -7.5" axle extension - 78.00 Polaris 1997 Domestic Twins and all 1998 and Newer -121" to 136" -7.5" axle extension - 88.00 Polaris Pro X Models (Includes Spacers) 121" to 136" -7.5" axle extension - 88.00 Polaris Models with OEM 136" Rails All Years (Includes Spacers) 136" to 151" -7.5" axle extension - 88.00 Polaris Models with 151" Rails (Includes Spacers) 151" to 166" -7.5" axle extension - 88.00

Holz Front Torque arm relocation kit for Arctic Cat M Series.

This kit fixes the track tensioning problem on stock M-Series rear suspension. It allows the suspension to cycle freely withought the track overtightening which frees up horsepower and improves the ride. A must have for any M-Series sled. Kit includes: brackets, hardware, and instructions.

	Price:	65.99 ,PR (see below for options and pricing)
	m7suspbracket

Ski-Doo Rail Extensions

Extend your rails on the Ski-Doo to allow use of longer tracks for more floatation and better performance in deep snow conditions. Sold per pair. Includes all hardware needed to install rail extensions. For SCIO and SCIO II Suspensions.

	Price:	85.99 ,PR (see below for options and pricing)
	doorailextensions
	O/P1 Size - Ski-Doo 136" to 151" - 85.99 Ski-Doo 144" to 159" - 85.99 Ski-Doo 121" -136" - 85.99 Ski-Doo 136" to 141" - 95.99 Ski-Doo 151" to 159" - 85.99 Ski-Doo 144" to 151" - 85.99 Ski-Doo 136" to 144" - 85.99

SLP Slide rail extensions for Yamaha (trailing arm models)

Extend the rails on your Yamaha to allow the use of longer tracks for more floatation and better performance in deep snow conditions. Sold per pair. Includes all hardware needed to install rail extensions. (8 tooth drivers are required for use with paddle tracks over 1?".)

	Price:	78.00 ,PKG (see below for options and pricing)
	slprailextyamaha
	C/S/O1 SizeYamaha Models with Trailing Arms and 8 Tooth Drivers -121" to 136"Yamaha Models with Trailing Arms -141" to 151"Yamaha Models with Trailing Arms and 9 Tooth Drivers -121" to 136"Yamaha Models with Trailing Arms -144" to 151"

Universal Rear Suspension Drop brackets

High Quality 1/4" thick 6061 Aluminum. Drop measurement is from the bottom of the running.

	Price:	79.95 ,PR (see below for options and pricing)
	dropbrackets
	C/S/O1 SizeDrop of 2" -3-1/4"Drop of 3-1/4" - 4-1/2"

Ryde F/X 9200 Series Gas Shocks

This shock is for those who seek a dimension where the laws of physics become undefined. One Piece extruded Aluminum cylinder. Anodized Aluminum body. Microcellular Urethane Bumper. Ice Scraper. Raised Valve Seat Piston. Large diameter IFP o-ring. Solid Teflon Piston and IFP Wear Bands. Super Finished Chrome Rod. Rebuildable. Available for many of the newer sleds, email or call with your particular make and model. All 9200 Series shocks are the same price.

	Price:	205.00 , (see below for options and pricing)
	9200rear

Ryde F/X 8200 Series Gas Shocks for Rear suspension

Patented low fade orifice carrier. Gas Cell eliminating foaming of oil. Microcellular Urethane bumper. Ice scraper. Anodized aluminum body. Call or email with your make and model. All 8200 series same price.

	Price:	95.99 , (see below for options and pricing)
	8200rear

Ryde FX 8600 series shocks, rear suspension

Maximum adjustability, high performance and superior comfort in this orifice carrier gas cell design. Compression screw adjust. Low Fade Orifice carrier. Anodized Aluminum body. Gas cell. Microcellular Urethane bumper. Ice scraper. Call or email with your make and model All 8600 series same price.

	Price:	199.95 , (see below for options and pricing)
	8600

SLP Rising Rate Spring Blocks

Our new bolt on rising rate rear suspension blocks provides full adjustment features to utilize full rear suspension travel for any driver weight. Uses two spring contact rollers to give a progressive rising rate effect as suspension goes through its travel. Whether you weigh 250 lbs. Or 120 lbs. Our kit is easily adjustable to enjoy the built in travel in your RMK suspension. Applications available for, XTRA-LITe, and EDGE-RMK suspensions.

	Price:	128.95 , (see below for options and pricing)
	springblocks
	C/S/O1 Application`00-01 Xtra-Lite suspension 31-203`02 Xtra-Lite suspension 31-204

Hiperfax& teflon slides

Our Hiperfax slide has been designed, engineered and developed in Maine by an Avid snowmobiler with the knowledge of what it takes to produce a slide that will give longer life, less drag, better fuel mileage and more speed. Sold and priced in pairs. Call or email with your model, all models same price.

	Price:	159.99 , (see below for options and pricing)
	pc1402

Kimpex 8" Plastic rear idler wheel

More economical solution to the "big wheel" effect. 8" plastic wheel with 62052 RS cold weather bearing with double seal, and a 3/4 bushing.

	Price:	26.00 ,EA (see below for options and pricing)
	kx411680

ARCTIC CAT SUSPENSION UPGRADE KIT

Fits models with 121 tracks and TSL adjuster. Helps deter inside ski lift and couples front and rear swing arm

	Price:	99.95 ,KIT (see below for options and pricing)
	CAT10

6205 Idler bearings

The 6205 is one of the most popular bearings. 25mm x 52mm x 15mm. The RS has a blue seal and cold weather grease. The AD is a drag racing bearing, non contact seal for low rolling resistance. The AM is the USA made bearing.

	Price:	4.50 ,ea (see below for options and pricing)
	6205
	O/P1 Style - Blue seal (bearing with 1 rubber seal) - 4.50 Drag Racing - 3.70 USA Made (NSK bearing with 2 seals) - 13.15 Dual seal 6205 (Bearing with 2 double lipped rubber seals and Beacon 325 cold weather grease) - 4.05

Comet Ride-On shocks

Are you tired of rebuilding your shocks? Try these, You'll love the shoci, you'll love the ride. Designed just for snowmobiles, with a unique by-pass design that adjusts automatically to any terrain. Soft and smooth to flat and rough. Call or email your make and model. All Comet Ride-On shocks same price, (except for a select few Yamaha and Ski-Doo models) These shocks are being discontinued and are limited to quantity on hand.

	Price:	198.00 , (see below for options and pricing)
	comet

IDLER WHEEL WITH BEARING

4.25" x 5/8"

	Price:	12.00 ,EA (see below for options and pricing)
	KX411671

YAMAHA IDLER WHEEL

	Price:	11.20 ,EA (see below for options and pricing)
	KX411695

IDLER WHEEL

	Price:	11.55 ,EA (see below for options and pricing)
	KX411685

IDLER WHEEL

	Price:	15.00 ,EA (see below for options and pricing)
	KX411670

SPRING HOOK

	Price:	2.00 ,EA (see below for options and pricing)
	LP04145

YAMAHA TRANSFER ROD

	Price:	113.75 ,PR (see below for options and pricing)
	MA8020

YAMAHA IDLER WHEEL

	Price:	10.80 ,EA (see below for options and pricing)
	KX411696

IDLER WHEEL POLARIS

	Price:	18.60 ,EA (see below for options and pricing)
	KX411667

Results 1 - 25 of 70

Go to Page: 1 2 3	Search Again	Return to Homepage

You have line items in your shopping cart

VIEW CART

CHECK OUT

Empty your cart