Search Results page

Polaris Fuel filter assembly

Fuel filter assembly with hose for the following Polaris snowmobiles.
06 - 700 Classic, 700 HO Touring, 700/900 Fusion I/Q, 700/900 RMK, 900 Switchback.
05 - 900 RMK, 900 Fusion, 900 Switchback.
OEM # 2520377.

�

Price: 20.00 , (see below for options and pricing)

327125

Timbersled Clean air intake system, Polaris 700/900

Designed to save weight, add HP and to reduce under hood heat by increasing air flow through the engine compartment. These kits pull in a combination of under hood air and cold outside air, allowing the engine to never bog due to snow plugging the OEM intake screens. All kits properly mount the intake sensors, giving the engine proper tuning without having to rejet or remap the fuel system.
This kit will save 7.5lbs and add 3hp.
Fits the 05/06 RMK, Switchback & Fusion 700/900.
Kit includes: Intake manifold, air filter, prefilters and clutch cover.

�

Price: 245.00 , (see below for options and pricing)

200261

Timbersled Clean air intake system, Arctic Cat

Designed to save weight, add HP and to reduce under hood heat by increasing air flow through the engine compartment. These kits pull in a combination of under hood air and cold outside air, allowing the engine to never bog due to snow plugging the OEM intake screens. All kits properly mount the intake sensors, giving the engine proper tuning without having to rejet or remap the fuel system.
This kit comes with Intake manifold, 2 air filters, 2 prefilters and 5 hood screens.
Fits 05-10 M600, 700, 800, 1000.
3HP gain and 7lb weight loss.

�

Price: 245.00 , (see below for options and pricing)

200263

Timbersled Clean air intake system, Ski-Doo XP

Designed to save weight, add HP and to reduce under hood heat by increasing air flow through the engine compartment. These kits pull in a combination of under hood air and cold outside air, allowing the engine to never bog due to snow plugging the OEM intake screens. All kits properly mount the intake sensors, giving the engine proper tuning without having to rejet or remap the fuel system.
Fits: 08-2010 Ski-Doo XP 600, 800.
Reduces under hood height and extends belt life.
Eliminates intake bogging.
This kit comes with Intake pod cover, 2 snow-cone air filters, 2 pre-filters, Headlight mounting bracket, 2 side panel screens.
4HP gain and 4lb weight loss.

�

Price: 268.00 , (see below for options and pricing)

200267

Timbersled Clean air intake system, Ski-Doo RT

Designed to save weight, add HP and to reduce under hood heat by increasing air flow through the engine compartment. These kits pull in a combination of under hood air and cold outside air, allowing the engine to never bog due to snow plugging the OEM intake screens. All kits properly mount the intake sensors, giving the engine proper tuning without having to rejet or remap the fuel system.
Fits 05-07 Ski-Doo RT 1000 with SDI.
Reduces under hood height and extends belt life.
Eliminates intake bogging.
This kit comes with Intake air cover, air filters, 3 side panel screens (screens are black).
4HP gain and 4lb weight loss.

�

Price: 245.00 , (see below for options and pricing)

200264

Timbersled Clean air intake system, Ski-Doo Rev

Designed to save weight, add HP and to reduce under hood heat by increasing air flow through the engine compartment. These kits pull in a combination of under hood air and cold outside air, allowing the engine to never bog due to snow plugging the OEM intake screens. All kits properly mount the intake sensors, giving the engine proper tuning without having to rejet or remap the fuel system.
Fits: 03-07 Ski-Doo Rev 600, 800 w/dpm.
Reduces under hood height and extends belt life.
Eliminates intake bogging.
This kit comes with Intake air cover, air filters, 2 side panel screens (screens are black) & Carb. mount.
4HP gain and 4lb weight loss.

�

Price: 245.00 , (see below for options and pricing)

200265

Timbersled Clean air intake system, Polaris Dragon 6/7/800 (08-2010)

Designed to save weight, add HP and to reduce under hood heat by increasing air flow through the engine compartment. These kits pull in a combination of under hood air and cold outside air, allowing the engine to never bog due to snow plugging the OEM intake screens. All kits properly mount the intake sensors, giving the engine proper tuning without having to rejet or remap the fuel system.
Eliminates snow ingestion problem found on the Dragons.
This kit comes with Intake manifold, air filter, pre-filter, & improved intake screens..
4HP gain.

�

Price: 225.00 , (see below for options and pricing)

200262

Timbersled Clean air intake system, Polaris Dragon 6/700 (2007)

Designed to save weight, add HP and to reduce under hood heat by increasing air flow through the engine compartment. These kits pull in a combination of under hood air and cold outside air, allowing the engine to never bog due to snow plugging the OEM intake screens. All kits properly mount the intake sensors, giving the engine proper tuning without having to rejet or remap the fuel system.
Eliminates snow ingestion problem found on the Dragons.
This kit comes with Intake manifold, air filter, pre-filter, & improved intake screens..
4HP gain.

�

Price: 220.00 , (see below for options and pricing)

200266

SLP's Hot Air Elimination Kit for Ski-Doo Rev

The REV is in desperate need of addiditional chassis ventilation to eliminate unwanted underhood heat build up. This kit effectively forces cold air into the chassis via two Flow-Rite? Intake Kits located in the rear of the shock tower. It then evacuates the hot air out of the chassis via an attractive brushed aluminum outlet grate. The outlet grate utilizes a powder snow pre-filter to eliminate powder snow build up or ingestion.
Hot Air Elimination kit includes; Air Outlet Grate and (2) Flow-Rite? Intake Kits.

�

Price: 66.50 ,KIT (see below for options and pricing)

doohotairkit
_O/P1

SLP's Hot air elimination kit for the Polaris IQ chassis

SLP Hot Air Elimination Kits help reduce stagnant underhood hot air to maintain higher horsepower by delivering additional cold air intake and hot air escape from the chassis.
The kit for the left side helps to keep the clutches running cool which considerably reduces the chance for performance loss due to heat saturation and improves belt life.
The kit for the right side helps to reduce underhood heat given off by the exhaust system for a more consistent running engine.
Vents utilize a powder snow pre-filter that repels snow and water, yet allows air to pass right through.
These vents are sold in kits for the right and left side or as individual components.
Kit Contents:
Left Side: Belly Pan Vent, Side Panel Vent, Pre-Filter Backing Shield and Installation Hardware.
Right Side: Belly Pan Vent, Side Panel Vent, and Installation Hardware

�

Price: 58.00 ,KIT (see below for options and pricing)

iqhotairkit
_C/S/O1

SLP Hot Air Elimination Kit, Arctic Cat M-7

SLP Hot Air Elimination Kits help reduce stagnant underhood hot air to maintain higher horsepower by delivering additional cold air intake and hot air escape from the chassis. The kit for the left side helps to keep the clutches running cool, which considerably reduces the chance for performance loss due to heat saturation and improves belt life. The kit for the right side helps to reduce underhood heat given off by the exhaust system for a more consistent running engine. Vents utilize a powder snow pre-filter that repels snow and water, yet allows air to pass right through. These vents are sold in kits for the right and left side.
Kits include a side panel vent and two Flow-Rite? Intake kits.

�

Price: 83.95 ,KIT (see below for options and pricing)

cathotairkit
_C/S/O1

SLP Flow-Rite for Speedometer or Tachometer hole

This new 4" Pre-Filter was designed to replace the speedometer or tachometer to allow for more cold air flow into the intake tract for more air box feed. Made with a powder snow pre-filter that repels snow and water yet allows air to freely pass through.
Requires a 4-1/2" hole for intallation.

�

Price: 28.95 ,ea (see below for options and pricing)

14-258

Powder Snow Pre-Filter, EDGE

This intake filter eliminates powder and ice build up on the OEM foam which restricts air flow. It features an attractive brushed aluminum grate which includes a special pre-filter materail that repels snow and water, yet maintains high air flow. The stock foam can even be removed to maximize air flow. Sold per pair.

�

Price: 39.00 , (see below for options and pricing)

prefilteredge

High Flow Air Box Conversion kit, Polaris

Kit adapts to the stock bottom box to increase airflow. Designed with a special high-flow intake air horn which increases intake air velocity. This Air Intake Kit delivers more available air volume into the airbox between engine cycles. In turn improving atomization efficiency of fuel which improves throttle response and delivers an additional 4 hp peak and 5 hp midrange increase.
Fits 97-01 600/700/800 Big Block twins, Xc, SKS, RMK. (Does not fit Edge's)

�

Price: 74.99 , (see below for options and pricing)

700airbox

SLP High Flow Air Horn Intake kit for Polaris Edge's

For 2000-04 Polaris Edge Models. The SLP high flow air horn converts the top of your airbox to increase intake air velocity. This kit delivers more available air volume into the airbox improving atomization efficiency of fuel in turn improving throttle response and providing an additional 3 hp peak. Good improvement for stock sleds, mandatory for modified ones. SLP recommends using Flow-Rite Intake Filters in conjuction with the Air Horn kit

�

Price: 36.25 , (see below for options and pricing)

airhornedge
_C/S/O1

SLP Flow Rite intake kit

Eliminate air intake restrictions by installing the Flow-Rite in the dash or intake tract for more air box feed. The Flow-Rite is supplied with a powder pre-filter that repels snow and water yet passes air right through. A must for modified sleds. Sold per each.

�

Price: 17.95 , (see below for options and pricing)

florite
_C/S/O1

SLP's High Flow Airbox for Polaris 700/900 IQ chassis

This High Flow Air Box kit increases cold air delivery to the engine by substantially reducing air intake restriction. This increased air flow results in more horsepower and improved running consistency. Not only does it deliver more performance, but it also sheds an amazing 12 pounds* of weight. This kit also comes with a new aluminum belt gaurd that allows air in and around the clutches for cooler running and better consistency.
*RMK and Switchback models radiator must be removed

�

Price: 289.95 ,KIT (see below for options and pricing)

highflowairboxIQ
_C/S/O1

Powder Snow Pre-Filter Gen II

Pre-filter for Polaris Gen II Big Block Twins. This intake filter eliminates the need for cleaning snow out of the OEM foam. Special material keeps snow and water out. A quick brush with a glove removes powder. Sold Per Each

�

Price: 14.99 , (see below for options and pricing)

PrefiltergenII

Powder Snow Prefilter for 900 twin Stock intake

This new Powder Snow Prefilter kit for Polaris 900 Twins increases intake surface area for increased performance. It also eliminates the stock foam filters that often fall out and get lost. The prefilter securely fastens to the hood to provide a more positive seal for improved cold air intake with less chance of snow ingestion through the intake vents. This kit features an attractive brushed aluminum grate which utilizes a special pre-filter material that repels snow and water, yet maintains high air flow.
Sold per set.

�

Price: 38.50 ,SET (see below for options and pricing)

14-227

SLP Pre-Filter for Ski-Doo Rev

The stock intake on the Rev's is known for plugging when playing in the deep powder, eliminate that problem by adding this SLP Prefilter made of unique material which repels snow and water while allowing air to pass right through.
A must for anyone riding in deep powder.

�

Price: 18.95 ,ea (see below for options and pricing)

sp14198

SLP's High Flow Intake kit for Ski-Doo Rev (except RT chassis)

The REV's stock air intake is restrictive and because of its placement it is prone to plugging with powder snow and ice. This results in a significant loss in horsepower which makes the sled very inconsistent when running in deep snow conditions. This High Flow? Intake kit corrects these problems by providing more than double the intake surface area for added air flow to the engine. Its placement as well as its design, which utilizes a powder snow pre-filter that repels snow and water, which reduces the tendency of powder snow and ice plugging by shedding the snow rather than allowing it to build up.

�

Price: 83.95 ,KIT (see below for options and pricing)

doointakekit
_O/P1

SLP Powder valves

These trick new flapper valves are installed in the top side of the air box on Ski-Doo XP 800 models to provide additional air flow to the engine. They are activated by air box vacuum. When the stock intake begins to plug in deep powder snow conditions, these valves open to deliver the necessary air flow that the engine demands. This substantially improves consistency when running in deep powder snow conditions. Sold per pair.

�

Price: 49.95 , (see below for options and pricing)

14134
_C/S/O1

VISU-FILTER INLINE FUEL FILTER 1/4" 90 MICRON

�

Price: $2.90. ,EA (see below for options and pricing)

FF704CB
_O/P1

Holtzman Tempa Flow

The TEMPA FLOW automatically tunes multiple carburetors for changes in ambient temperature, maintaining a more constant air/fuel mixture from 1/8 to wide open throttle. Using this regulator, a typical stock snowmobile run at +40F (+4C) ambient temperature will deliver 6% more horsepower while using 8% less fuel. Other "turn on" temperatures are available allowing its use on any carburetor engine. A manual adjustment provides for altitude compensation. An air jet kit is also available which can be used on any carbureted engine. A manual adjustment for altitude compensation. An air jet kit is also available which can be used to slightly adjust the fuel flow versus temperature curve shown. This regulator significantly improves engine efficiency and performance.

�

Price: 172.00 ,ea (see below for options and pricing)

14-237
_O/P1

Holtzman ATACC

Automatic Temperature & Altitude Carburetor Compensator. This compensator automatically adjusts carb jetting for temperature and altitude changes. The ATACC uses the patented temperature compensation used in the TEMPA FLOW coupled with a patent pending baromaetric pressure adjustment, providing complete automatic fuel flow adjustment. For snowmobile applications the ATACC leans the fuel mixture at temperatures above -20F (-29C); for ATV applications the ATACC leans the fuel mixture at temperatures above +40F (5C) and either can easily be set for other minimum temperatures. The unique air pressure sensing section also allows the ATACC to easily be set for any minimum altitude. This product provides compensation for normal temperature changes as well as elevation changes of over 10000 feet (3000 meters).

�

Price: 245.00 , (see below for options and pricing)

ATACC
_O/P1

Results 1 - 25 of 203


Go to Page: 1 2 3 4 5 6 7 8 9	Search Again	Return to Homepage